HOW TO MAKE A FROCK FROM AN OLD OR USED SHIRT

HOW TO MAKE A FROCK FROM AN OLD OR USED SHIRT

So let's start for making frock from an old shirt, first we have to remove cut sleeve, color & also have to remove pocket.

Now measure the length of frock with the help of inch tape & cut the rest of useless part.

Then stitch the centre & fold it for measuring.

Measure shoulder as 4 inches, Armhole 4 inches, chest 7 inches, neck 3 inches, neck broadness 2 inches.Now cut it where you have drawn line with caryons.

For making a design cut a little piece of cloth from sleeves now stitch it & apply lace the stitch it from 3 corners & leave.

Now fold it 1 corner as we can't see the thread of stitching. Have a beautiful design as it looks pretty now stitch this lace on the front side at the centre. Now the piece which we cut before take it & use it for making neck broadness in both side (front & back).

Now finally stitch both side together. The new baby frock is ready to wear.

HOW TO SEW A SIMPLE PAINT

How to sew a simple paint

First we place a paint that tit will use it as a pattern like, So we cut out front & back panels.

Place front & back panels together & sew the crotch seam.


Put pins on front and back panel together & sew.

Fold the waist part 2cm inside & sew around & leave a opening for the elastic fold the hem 2cm inside & sew around.

Now use the safety pins to pull the elastic through the opening we made earlier.

After putting the elastic through the opening sew it together with a zigzag stitch, don't forget to sew close the opening.

Now We Are Done

DIY DESIGNED CAP CUTTING

DIY DESIGNED CAP CUTTING

Hellow friends today we are making designed cap & now a day this type of cap is mostly use because which we can wear easily on different types of shirt, t-shirts tops.

STEP: 01

So for making this designed cap we need 1 yard of net & lace, which will use on the bottom of cap

Firstly we have four fold of this net. Then we marking from centre 17 inches on all round we mark 17 inches but you can take very, then we join all mark for round shape.

STEP: 02

In this way we are marking for neck & takes 2 inches of length & 3 inches of breathe you can take 3 by 3 inches then join both these point for round shape. Now we just cut this then we open this cap.

STEP: 03

Now we start sewing first we make neck then we take strip which we use around the neck then we put notches then take double fold to inside now we sew.

STEP: 04 

Finally we apply lace on the bottom of cap for looking prefernce. Our designed cap is done.

HOW TO MAKE AN EASY DRESS

HOW TO MAKE AN EASY DRESS

The dress is very easy to stich and it looks very nice & seems to be very comfortable and reliable for daily wear.

Now there are some steps by which you can stich the dress in easy way.

 

 

 

STEPS: 01   WHAT YOU NEED

First you will need a ribbed tank top, you could also use a t-shirt for making a dress & 3 yards of matching fabrics.

 

STEP: 02     MAKE THE CUT PIC

Cut the tank top almost in half this is really you preference. It is depending on your bust size & how short you want to your dress. The shorter the tank top, the shorter your dress will be, but if you like to wear long then take fabric for.

 

 

 

STEP: 03     SEWING IT UP

Now take the fabrics for bottom part of your dress & wrap it around your waist about it & a half times & cut it in a straight line. The fabrics will come to you already folded, don’t it unfold, in this way you have a kind of bubble hum.

Next you fold your fabrics in half remember it’s already folded, so you are folding it again creating a shirt sew up to short side (there will be four layers of fabrics that you are sewing.

 

STEP: 04     MAKING THE RUFFLES

Then you have a big blocky rectangular shirt. Next open it up and change your sewing machine’s tension so it will create the biggest stitches possible. Instead of sewing a waist bod in like a normal skirt. You are just sewing a straight line around the two layers of fabrics join together.

We are going to create a ruffle, don’t do a back stitch when you start sewing around the skirt make sure the skirt ruffle are evenly distributed & pretty loose.

 

 STEP: 05     SEWING THE TOP TO THE BOTTOM

Now turn the skirt part inside out so that the raw edges (from when you turned it into that big blocky skirt) are out put the tank top inside as pictured.

Next you will the top and with dress together.

One’s it pinned make sure that the tank top part of the dress folds out to be inside out like the skirt part.

Make sure your tension is set back to normal and sew the skirt and the tank top together just under the previous stitches.

 

STEP: 06     ALMOST DONE

Now remove the pins which you were put & the dress part is.

 

 

STEP: 07 THE FINISHING TOUGH

Cut the strip out of the left over fabric about double of how thick you a want your sash to bed. Fold it in half long ways so that the printed side is facing in and sew up the sides.

Turn it right side out and finish up the edges, and you are done! The sash is not actually sewn onto the dress, it’s removable and is just tied in the back you could always easy to regular belt or another co-ordinate fabrics for the belt.

STEP: 08 FINISH

 

 

 

 

 

 

How to make cloths

How to make cloths?

There are many reasons why you want to make cloths. If you interested in fashion design have some garments in mind that you would like to make for yourself or simply need to make some alteration to the cloths you already know how to sew a garment.

first I want tell you about the basic which will help you in learning stitching.

1. learn the different tools which you’ll need:- For making cloths first you should know about the sewing machine. & its all and how to use it. In beginning you may be face any problem regarding parts of sewing machine. But after some or more practice you will comfortable sewing machine.

Now here are some points which will guide you.

• Chalk  for making the fabric so you know where to sew & where to cut
• You’ll need a really nice, sharp pairs of seissor that you help for cutting cloths easily but be careful because the sessor will dull more quickly & can damage your fabric.
• Tape measuring especially a flexible tape measure you will use this to take measurements and make fit adjustments of you need them.
• Pins for holding the fabrics in position before you start sewing.

2. Acquire a sewing machine:-

There are basically too types of sewing machine.

   a) Manual sewing machine

   b) Electrical sewing machine

a) Manual sewing machine:-

Manual sewing machine is used by 60% population of Pakistan. It consume more time & energy but it this the chance of error is less as well as injures are also presented.

b) Electrical sewing machine:-
When you will got perfection in stitching so you can use electrical machine to save your time & energy because electrical sewing machines are much more powerful & much faster.

3. Learn the parts of sewing machine :-

• The spool holder holds the spool of thread and controls the direction of the thread while it goes through the types of machine you have your spool holder might be horizontal or it might be vertical.
• Bobbin is basically a spindle that is wound with thread. You have to wind the bobbin with thread and fit it into the bobbin case which is present under the needle plate).
• The amount of tension needed to make sure the stitches come through properly.
• The take up lever to control the thread tension. If the thread tension isn’t at it proper level the thread will knot up jamming sewing machine.

4. Start simple:- When you were just begining with making cloths should start with aimple desine like skirts simple kurti, tousers because these are easier to make. When you were first starting please try to a wide making cloths with buttons or zippers. Do aprona or pajamas with elastic bands. Once you have gotten the hange of your tools and your sewing machine then you can start adrancing.

5. Take the appropriate measurments exceded to make pattern:-    if you making cloths you should to take measurments because measurment is the most important if we take correct measurement the cloths will fit when we finish that's why.

For example:-

For Measurement of Trousers:-we have to measure waist, hip, crotch depth & full leg length from waist to floor for the measureing trousers.

For Measurement of skirts:- In simple way, we need to measure waist, hip & the length of skirt is depened on what type of skirt you want to make.

For Measurement of shirts:- we have to measure the neck, chest, shoulder, width, armlength, shirt length.